• Supports the operating systems : Windows® 98/2000/XP/Vista/7/10.
• Requires as least: Processor Pentium II or Athlon, 128MB of RAM, 80 Mb of free space on the hard disk and a USB port.

IntelliCAD is a professional CAD, 2D/3D writing in Visual C++ by Intellicad technology consortium constituted by 30 firms. The version of IntelliCAD is available generally in two editions. Classical Edition and Professional Edition with a great number of software libraries of rendering and modeling. Both are perfectly compatible with AutoCAD* in the format of the file of sketch. Even the user interface, without losing in functionality, is extremely similar to that one of the most  famous competitor. There are many distributions of IntelliCAD:

• BricsCAD 

• CMS IntelliCAD

• ProgeCAD

• ZwCAD

• ...

IntelliCAM works with all the editions of IntelliCAD.

(*) AutoCAD is a registered mark of Autodesk.
 

• Filters the non meaningful parts of the drawing for the NC.
• Defines the dimensions of the piece and it allows to operate on the standard faces and on tilted faces.
• Resolves the problem of the search of the tangents among arcs, lines and points.
• Directs the geometry with commands of inversion. Modifies the position of the points of beginning and end. Adds in automatic way the runs of entry and exit.
• Introduces in a parametric form figures with a geometry simple.
• Expresses in a parametric form complex geometries. Uses mathematical rules or simple bonds with the dimensions of the piece.
• Produces writings with the conversion of the fonts. From TTF format to DXF format.

• Introduces a set of variables to modify the original geometry of the drawing in parametric way.
• Applies parametric methods for to bond the geometry of the workmanships to the variations of the piece's dimensions.
• Calculates the movement of the tool center point with or without compensation ray.
• Performs operations of projection and wrapping on cylindrical surfaces to get trajectories for machines with four axles.
• Empties areas of any form. Respects the inserted islands. Insert automatically several job cycles.

• Read the machine parameters. Attributes the technological information to the geometry.
• Interprets points, lines, arcs, polylinee, ellipsis and splines as workings. Inserts job cycles as buttonholes, milling and pockets with a single way or a multiple way.
• Adapts the output format for every machine, of new or old generation. From the simple HPGL format to the complex ISO G-CODE.
• Handles in a open way the codes G and M. It does not require the supplier assistance.

• Applies various sorting criterions to the piece. The sorting rules take into account the queries of the operator, the geometry of the drawing, the priorities among tools and types of working.
• Applies various optimization criteria in the choice of the tools. With a particular attention to the boring holes cycles.

• Connects all the elaborations with the machine parameters.
• Changes the tools parameters in the same job session of the CAD.
• Furnishes an easy tool for the positioning of the vacuum blocks and the verification of the encumbrances.
• Visualizes the movement of the tool center point. Performs a series of controls on the feasibility of the workings.
• Provides the design of a executive working list.
• Allows to run simultaneously more configurations of machine or more machines.